Articles

Guides, machine walkthroughs and industry notes from our Orlando factory floor.

1.5" Metal B Deck Roof Machine

23 November 2023

Forming the 1.5-inch B deck profile for roofing applications.

22 November 2023

Two profiles from one line, running on stacked levels.

22 November 2023

Producing the board and batten siding profile favoured for its traditional look.

22 November 2023

Forming 1.5-inch form deck for use as permanent concrete shuttering.

22 November 2023

A deep rib deck profile for longer spans and heavier loads.

22 November 2023

Structural floor and roof decking, the most widely specified deck profile.

22 November 2023

The original metal roofing profile — strong, cheap and still everywhere.

21 November 2023

A durable U-panel profile for roofing and wall applications.

21 November 2023

Coil is where every formed profile starts. Widths, gauges and how it is supplied.

21 November 2023

Heat, storms and hail make metal a strong choice for Texan roofs.

21 November 2023

Flashing stops water penetrating at joints, edges and penetrations.

21 November 2023

Demand varies by market. Which machines sell where, and why.